EE2401 POWER SYSTEM OPERATION AND CONTROL
AIM: To understand the day to day operation of power system and the control actions
to be implemented on the system to meet the minute-to-minute variation of
system load demand.
OBJECTIVES:
To have an overview of power system operation and control.
To model power-frequency dynamics and to design power-frequency controller.
To model reactive power-voltage interaction and the control actions to be
implemented for maintaining the voltage profile against varying system load.
UNIT I INTRODUCTION 9
System load – variation - load characteristics - load curves and load-duration curve
(daily, weekly and annual) - load factor - diversity factor. Importance of load forecasting
and simple techniques of forecasting. An overview of power system operation and
control and the role of computers in the implementation. (Qualitative treatment with block
diagram).
UNIT II REAL POWER - FREQUENCY CONTROL 9
Basics of speed governing mechanism and modeling - speed-load characteristics – load
sharing between two synchronous machines in parallel. Control area concept LFC
control of a single-area system. Static and dynamic analysis of uncontrolled and
controlled cases. Integration of economic dispatch control with LFC.
Two-area system – modeling - static analysis of uncontrolled case - tie line with
frequency bias control of two-area system - state variable model.
UNIT III REACTIVE POWER–VOLTAGE CONTROL 9
Basics of reactive power control. Excitation systems – modeling. Static and dynamic
analysis - stability compensation - generation and absorption of reactive power. Relation
between voltage, power and reactive power at a node - method of voltage control - tapchanging
transformer. System level control using generator voltage magnitude setting,
tap setting of OLTC transformer and MVAR injection of switched capacitors to maintain
acceptable voltage profile and to minimize transmission loss.
UNIT IV COMMITMENT AND ECONOMIC DISPATCH 9
Statement of economic dispatch problem – cost of generation – incremental cost curve -
co-ordination equations without loss and with loss, solution by direct method and λ-
iteration method. (No derivation of loss coefficients).
Statement of Unit Commitment problem – constraints; spinning reserve, thermal unit
constraints, hydro constraints, fuel constraints and other constraints. Solution methods -
Priority-list methods - forward dynamic programming approach. Numerical problems only
in priority-list method using full-load average production cost.
UNIT V COMPUTER CONTROL OF POWER SYSTEMS 9
Need of computer control of power systems. Concept of energy control centre (or) load
dispatch centre and the functions - system monitoring - data acquisition and control.
System hardware configuration – SCADA and EMS functions. Network topology - state
estimation - security analysis and control. Various operating states (Normal, alert,
emergency, in-extremis and restorative). State transition diagram showing various state
transitions and control strategies.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Allen. J. Wood and Bruce F. Wollenberg, ‘Power Generation, Operation and Control’,
John Wiley & Sons, Inc., 2003.
2. Chakrabarti & Halder, “Power System Analysis: Operation and Control”, Prentice Hall
of India, 2004 Edition.
REFERENCES
1. D.P. Kothari and I.J. Nagrath, ‘Modern Power System Analysis’, Third Edition, Tata
McGraw Hill Publishing Company Limited, New Delhi, 2003. (For Chapters 1, 2 & 3)
2. L.L. Grigsby, ‘The Electric Power Engineering, Hand Book’, CRC Press & IEEE
Press, 2001.
3. Hadi Saadat, “Power System Analysis”, (For the chapters 1, 2, 3 and 4)11th Reprint
2007.
4. P.Kundur, ‘Power System Stability and Control’ MC Craw Hill Publisher, USA, 1994.
5. Olle.I.Elgerd, ‘Electric Energy Systems theory An introduction’ Tata McGraw Hill
Publishing Company Ltd. New Delhi, Second Edition 2003.
AIM: To understand the day to day operation of power system and the control actions
to be implemented on the system to meet the minute-to-minute variation of
system load demand.
OBJECTIVES:
To have an overview of power system operation and control.
To model power-frequency dynamics and to design power-frequency controller.
To model reactive power-voltage interaction and the control actions to be
implemented for maintaining the voltage profile against varying system load.
UNIT I INTRODUCTION 9
System load – variation - load characteristics - load curves and load-duration curve
(daily, weekly and annual) - load factor - diversity factor. Importance of load forecasting
and simple techniques of forecasting. An overview of power system operation and
control and the role of computers in the implementation. (Qualitative treatment with block
diagram).
UNIT II REAL POWER - FREQUENCY CONTROL 9
Basics of speed governing mechanism and modeling - speed-load characteristics – load
sharing between two synchronous machines in parallel. Control area concept LFC
control of a single-area system. Static and dynamic analysis of uncontrolled and
controlled cases. Integration of economic dispatch control with LFC.
Two-area system – modeling - static analysis of uncontrolled case - tie line with
frequency bias control of two-area system - state variable model.
UNIT III REACTIVE POWER–VOLTAGE CONTROL 9
Basics of reactive power control. Excitation systems – modeling. Static and dynamic
analysis - stability compensation - generation and absorption of reactive power. Relation
between voltage, power and reactive power at a node - method of voltage control - tapchanging
transformer. System level control using generator voltage magnitude setting,
tap setting of OLTC transformer and MVAR injection of switched capacitors to maintain
acceptable voltage profile and to minimize transmission loss.
UNIT IV COMMITMENT AND ECONOMIC DISPATCH 9
Statement of economic dispatch problem – cost of generation – incremental cost curve -
co-ordination equations without loss and with loss, solution by direct method and λ-
iteration method. (No derivation of loss coefficients).
Statement of Unit Commitment problem – constraints; spinning reserve, thermal unit
constraints, hydro constraints, fuel constraints and other constraints. Solution methods -
Priority-list methods - forward dynamic programming approach. Numerical problems only
in priority-list method using full-load average production cost.
UNIT V COMPUTER CONTROL OF POWER SYSTEMS 9
Need of computer control of power systems. Concept of energy control centre (or) load
dispatch centre and the functions - system monitoring - data acquisition and control.
System hardware configuration – SCADA and EMS functions. Network topology - state
estimation - security analysis and control. Various operating states (Normal, alert,
emergency, in-extremis and restorative). State transition diagram showing various state
transitions and control strategies.
TOTAL : 45 PERIODS
TEXT BOOKS
1. Allen. J. Wood and Bruce F. Wollenberg, ‘Power Generation, Operation and Control’,
John Wiley & Sons, Inc., 2003.
2. Chakrabarti & Halder, “Power System Analysis: Operation and Control”, Prentice Hall
of India, 2004 Edition.
REFERENCES
1. D.P. Kothari and I.J. Nagrath, ‘Modern Power System Analysis’, Third Edition, Tata
McGraw Hill Publishing Company Limited, New Delhi, 2003. (For Chapters 1, 2 & 3)
2. L.L. Grigsby, ‘The Electric Power Engineering, Hand Book’, CRC Press & IEEE
Press, 2001.
3. Hadi Saadat, “Power System Analysis”, (For the chapters 1, 2, 3 and 4)11th Reprint
2007.
4. P.Kundur, ‘Power System Stability and Control’ MC Craw Hill Publisher, USA, 1994.
5. Olle.I.Elgerd, ‘Electric Energy Systems theory An introduction’ Tata McGraw Hill
Publishing Company Ltd. New Delhi, Second Edition 2003.
0 comments:
Post a Comment